Squeezebox Touch Mods

[Willie]

This is for anyone wanting to get more out of their Squeezebox Touch.

http://soundcheck-audio.blogspot.com/2011/11/touch-toolbox-30.html

I have tried most of the software mods and find they can make improvements to sound quaility of the touch whether you use an external DAC or not!!:D

[rumblefish]

Hi Willie thanks for the post,have you gone through the set up,I cant progress past the "putty" stage-wont accept" is" any ideas please

To see if you file is there type below command and push <enter> afterwards:

ls


(If the file is not listed something went wrong with the copy in WinScp, try to check the source/target directories)


If the file is listed, you type:


tar xvf to*

( You can use the asterisks instead of typing the full name)


The archive gets unpacked now. All files are distributed to the target directories with correct permissions.



3.7 Initialize the Toolbox

Just type in the terminal commandline:


tt -i

[Willie]

I don't use putty. I find WinScp easier. Once you have it installed and login to the touch (check the ip address) Make sure you have initiated remote access in Advanced settings password 1234.

When you get in type CTRL T to bring up a terminal

Good luck and remember you can do a hard reset if it goes all wrong.